Loading...
Loading...
Industrial Wastewater Canada sizes and supplies mining & mineral processing for plants in Burnaby, British Columbia. Local demand is driven by food & beverage, metal fabrication, biotech, electronics, discharging under Burnaby's sewer-use rules toward Fraser River / Burrard Inlet. Quote requests with flow rate and effluent type get a sized proposal.

Mine water treatment is a logistics problem wearing a chemistry costume. The chemistry is well understood: neutralize acidity with lime, precipitate dissolved metals as hydroxides, settle or filter the solids, and polish for whatever the permit singles out, whether that is selenium, arsenic, ammonia from blasting residue, or cyanide at gold operations. What makes mining hard is where it happens. The treatment plant that works on paper must also work at the end of a winter road, staffed by a rotating crew, at minus forty, for a mine life that might be nine years or ninety.
Canadian mines discharge under the federal Metal and Diamond Mining Effluent Regulations, which set limits on metals, pH, total suspended solids and toxicity to fish, alongside provincial and territorial permits that are often tighter and site-specific. Water balance drives everything: a mine in the wet season is fighting volume, a mine in freeze-up is storing water it cannot treat fast enough, and closure planning means the water often needs treating long after the ore is gone.
Our equipment scope in this sector centres on solids and metals. Lime dosing and reaction tanks, lamella clarifiers that put high settling capacity inside a heated building footprint, filter presses and dewatering centrifuges for the metal hydroxide sludge, and industrial reverse osmosis or ion exchange where dissolved contaminants like selenium and sulphate need more than precipitation. For camps and advanced exploration sites we supply containerized mine water treatment plants that arrive winterized, pre-piped and tested, because field construction hours are the most expensive line in any northern budget.
The difference between a plant that runs and a plant that gets bypassed is usually maintainability. We select equipment that a millwright can service with the parts on site, and we design the sludge line for the haul distance the mine actually faces.
Bring us your water quality data, your permit limits and your site logistics. We will size the treatment train around all three, because at a mine, ignoring the third one is how projects fail. We also support the front end of mine life: bulk sample programs and advanced exploration camps carry discharge obligations of their own, and a rented or repurposed containerized plant is usually the right-sized answer at that stage.
Burnaby's industry concentrates in the Big Bend flats along the Fraser and the Still Creek corridor, some of the last close-in industrial land in Metro Vancouver. Food and beverage plants, metal fabricators, biotech firms and electronics manufacturers share those zones in a city of 249,000, and every significant discharger holds a waste discharge permit under GVS&DD Bylaw 299. Still Creek runs through the middle of it Still Creek is the detail that changes behaviour here. Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. That is the regulatory backdrop for mining & Mineral Processing in Burnaby: equipment gets sized against the local limits on the route to Fraser River / Burrard Inlet, not against a national average.
Location
Burnaby, British Columbia
Population 249K
Receiving Water
Fraser River / Burrard Inlet
Pricing
Sized & quoted per project
With salmon-bearing Still Creek running straight through Burnaby's industrial corridor, wastewater diligence here goes beyond the Bylaw 299 permit, because a creek incident is public within hours. In Burnaby, the plants asking about mining & Mineral Processing are mostly in food & beverage, metal fabrication, biotech and electronics, and each of those sectors puts a different load on a treatment train. Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. Direct discharge toward Fraser River / Burrard Inlet instead requires a waste discharge authorization under British Columbia's Environmental Management Act. In a city of Burnaby's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Burnaby tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies mining & Mineral Processing for plants across Burnaby and the surrounding region. Most local demand comes from food & beverage, metal fabrication, biotech, electronics. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. A salmon-bearing urban stream flowing directly through the industrial corridor means a spill or a cross-connection is visible within hours, in a region where stream stewardship groups are organized and vocal. Plants in the corridor invest in secondary containment, drain mapping and stormwater segregation beyond the letter of their permits because the reputational cost of a creek incident dwarfs the capital saved. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Fraser River / Burrard Inlet needs a waste discharge authorization under British Columbia's Environmental Management Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Burnaby's local limits. A processor in a city of 249K with food & beverage as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. On the process side the work is standard Metro Vancouver fare, DAF for food plants, oil-water separation and metals treatment for fabricators, batch neutralization for biotech, delivered into buildings where floor space is the scarcest input. Payback in Burnaby is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.