Loading...
Loading...
Industrial Wastewater Canada sizes and supplies coalescing filters for plants in Burnaby, British Columbia. Local demand is driven by food & beverage, metal fabrication, biotech, electronics, discharging under Burnaby's sewer-use rules toward Fraser River / Burrard Inlet. Quote requests with flow rate and effluent type get a sized proposal.

Free oil rises out of water on its own if you give it a quiet tank and a little time. Emulsified oil does not. Droplets of 20 microns and below stay dispersed indefinitely, sail straight through a gravity separator, and show up in your effluent sample as an oil and grease exceedance you cannot explain. The coalescing filter exists for exactly this gap.
The mechanism is collision and capture. Wastewater passes through oleophilic media or inclined plate packs, surfaces that oil wets preferentially. Fine droplets collide with the media, stick, and merge with the droplets already there, growing until buoyancy takes over and carries them to the surface for skimming. A compact vessel can hold effluent oil below 10 to 15 mg/L on free and dispersed oil, performance a plain gravity tank cannot reach at any residence time that fits inside a building.
Where these units earn their place: downstream of machine shops and compressor condensate systems, on wash bay and fuel handling drainage, and as a polishing stage after an API separator, capturing the fine fraction the big basin lets through. We supply both liquid-liquid configurations for oily water and gas-liquid configurations that strip sub-micron aerosols from compressed air and gas streams, in stainless or carbon steel vessels matched to the service.
Two housekeeping details separate a good installation from a frustrating one. First, media type: plate-pack and permanent-media coalescers are not consumables; the packs are removed, washed and returned, typically serving for the life of the vessel. Cartridge-style elements do load up with solids and are changed on a differential-pressure schedule, typically once or twice a year in industrial service, and our vessels carry differential-pressure indicators so the change-out is scheduled rather than discovered. Second, upstream solids: a simple strainer or settling stage ahead of the coalescer extends media life dramatically, and we design for easy pack removal so cleaning stays a maintenance task instead of a shutdown. We also cross-reference OEM cartridges directly, so replacement elements for an existing housing are a part number away.
One honest limit: coalescers do not remove chemically emulsified or dissolved oil. Surfactant-stabilized emulsions need chemical treatment or flotation, and we will say so before quoting. Send your flow rate, an analysis and your discharge limit, and a process engineer returns a sized configuration, budget price and delivery timeline, anywhere in Canada. Spare packs and cartridges are stocked against your housing model, and change-out procedures are documented at commissioning so the differential-pressure alarm leads to a scheduled swap, not a scramble.
Burnaby's industry concentrates in the Big Bend flats along the Fraser and the Still Creek corridor, some of the last close-in industrial land in Metro Vancouver. Food and beverage plants, metal fabricators, biotech firms and electronics manufacturers share those zones in a city of 249,000, and every significant discharger holds a waste discharge permit under GVS&DD Bylaw 299. Still Creek runs through the middle of it Still Creek is the detail that changes behaviour here. Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. That is the regulatory backdrop for coalescing Filters in Burnaby: equipment gets sized against the local limits on the route to Fraser River / Burrard Inlet, not against a national average.
Location
Burnaby, British Columbia
Population 249K
Receiving Water
Fraser River / Burrard Inlet
Pricing
Sized & quoted per project
With salmon-bearing Still Creek running straight through Burnaby's industrial corridor, wastewater diligence here goes beyond the Bylaw 299 permit, because a creek incident is public within hours. In Burnaby, the plants asking about coalescing Filters are mostly in food & beverage, metal fabrication, biotech and electronics, and each of those sectors puts a different load on a treatment train. Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. Direct discharge toward Fraser River / Burrard Inlet instead requires a waste discharge authorization under British Columbia's Environmental Management Act. In a city of Burnaby's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Burnaby tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies coalescing Filters for plants across Burnaby and the surrounding region. Most local demand comes from food & beverage, metal fabrication, biotech, electronics. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Still Creek—Big Bend industrial zone; GVS&DD Bylaw 299 permits. A salmon-bearing urban stream flowing directly through the industrial corridor means a spill or a cross-connection is visible within hours, in a region where stream stewardship groups are organized and vocal. Plants in the corridor invest in secondary containment, drain mapping and stormwater segregation beyond the letter of their permits because the reputational cost of a creek incident dwarfs the capital saved. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Fraser River / Burrard Inlet needs a waste discharge authorization under British Columbia's Environmental Management Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Burnaby's local limits. A processor in a city of 249K with food & beverage as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. On the process side the work is standard Metro Vancouver fare, DAF for food plants, oil-water separation and metals treatment for fabricators, batch neutralization for biotech, delivered into buildings where floor space is the scarcest input. Payback in Burnaby is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.