Loading...
Loading...
Industrial Wastewater Canada sizes and supplies coalescing filters for plants in London, Ontario. Local demand is driven by food & beverage processing, agri-food, auto parts, chemicals, discharging under London's sewer-use rules toward Thames River. Quote requests with flow rate and effluent type get a sized proposal.

Free oil rises out of water on its own if you give it a quiet tank and a little time. Emulsified oil does not. Droplets of 20 microns and below stay dispersed indefinitely, sail straight through a gravity separator, and show up in your effluent sample as an oil and grease exceedance you cannot explain. The coalescing filter exists for exactly this gap.
The mechanism is collision and capture. Wastewater passes through oleophilic media or inclined plate packs, surfaces that oil wets preferentially. Fine droplets collide with the media, stick, and merge with the droplets already there, growing until buoyancy takes over and carries them to the surface for skimming. A compact vessel can hold effluent oil below 10 to 15 mg/L on free and dispersed oil, performance a plain gravity tank cannot reach at any residence time that fits inside a building.
Where these units earn their place: downstream of machine shops and compressor condensate systems, on wash bay and fuel handling drainage, and as a polishing stage after an API separator, capturing the fine fraction the big basin lets through. We supply both liquid-liquid configurations for oily water and gas-liquid configurations that strip sub-micron aerosols from compressed air and gas streams, in stainless or carbon steel vessels matched to the service.
Two housekeeping details separate a good installation from a frustrating one. First, media type: plate-pack and permanent-media coalescers are not consumables; the packs are removed, washed and returned, typically serving for the life of the vessel. Cartridge-style elements do load up with solids and are changed on a differential-pressure schedule, typically once or twice a year in industrial service, and our vessels carry differential-pressure indicators so the change-out is scheduled rather than discovered. Second, upstream solids: a simple strainer or settling stage ahead of the coalescer extends media life dramatically, and we design for easy pack removal so cleaning stays a maintenance task instead of a shutdown. We also cross-reference OEM cartridges directly, so replacement elements for an existing housing are a part number away.
One honest limit: coalescers do not remove chemically emulsified or dissolved oil. Surfactant-stabilized emulsions need chemical treatment or flotation, and we will say so before quoting. Send your flow rate, an analysis and your discharge limit, and a process engineer returns a sized configuration, budget price and delivery timeline, anywhere in Canada. Spare packs and cartridges are stocked against your housing model, and change-out procedures are documented at commissioning so the differential-pressure alarm leads to a scheduled swap, not a scramble.
London sits at the centre of southwestern Ontario's agri-food belt, and its plants process what the surrounding counties grow: vegetables, dairy, grains and meat, alongside beverage bottlers, auto-parts makers and specialty chemical producers. The city of 422,000 discharges to the Thames River through six treatment plants, and Wastewater By-law WM-28 sets the terms for the industrial share of that flow. Agri-food seasonality is the sizing problem A London vegetable processor might run near zero flow in May and 1,500 m³/day at harvest, with BOD tracking the same curve. Centre of southwestern Ontario agri-food belt; City of London Wastewater By-law WM-28. That is the regulatory backdrop for coalescing Filters in London: equipment gets sized against the local limits on the route to Thames River, not against a national average.
Location
London, Ontario
Population 422K
Receiving Water
Thames River
Pricing
Sized & quoted per project
London's harvest-season surges, near-zero flow in May and 1,500 m³/day in September, make equalization and staged DAF trains the core of industrial wastewater design under By-law WM-28. In London, the plants asking about coalescing Filters are mostly in food & beverage processing, agri-food, auto parts and chemicals, and each of those sectors puts a different load on a treatment train. Centre of southwestern Ontario agri-food belt; City of London Wastewater By-law WM-28. Direct discharge toward Thames River instead requires an Environmental Compliance Approval from Ontario's Ministry of the Environment, Conservation and Parks. In a city of London's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in London tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies coalescing Filters for plants across London and the surrounding region. Most local demand comes from food & beverage processing, agri-food, auto parts, chemicals. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Centre of southwestern Ontario agri-food belt; City of London Wastewater By-law WM-28. Sizing pretreatment for the peak wastes capital eleven months a year; sizing for the average violates the by-law every September. The designs that work here lean on equalization storage, modular DAF trains that switch on in stages, and honest conversations with the city about seasonal discharge agreements. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Thames River needs an Environmental Compliance Approval from Ontario's Ministry of the Environment, Conservation and Parks. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against London's local limits. A processor in a city of 422K with food & beverage processing as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Auto-parts and chemical plants bring steadier flows with oil, metals and pH issues instead. The common thread is the Thames, a warm, slow river whose limited assimilative capacity keeps London's by-law enforcement consistent. Payback in London is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.