Industrial Wastewater Treatment Systems in Laval, Quebec

An industrial wastewater treatment system is rarely one machine. It is a train: screening to protect everything downstream, equalization to flatten the peaks your process throws at it, then the stages that actually remove what your permit or sewer-use bylaw regulates. We supply that train as a turnkey scope, from the first lab characterization through pilot testing, fabrication, commissioning and the paperwork your province expects, including ECA and CofA support in Ontario.

What you discharge sets the design

The starting point is always the same question: what are you discharging, and what are you allowed to discharge? A food plant fighting BOD surcharges under an industrial waste surcharge agreement needs a different train than a metal finisher holding zinc below a bylaw limit, and both differ from a remote camp discharging to a receiving water under a provincial permit. We size against your actual numbers, not a catalogue page. That means a composite sample or a recent lab analysis, your peak flow rather than your average, and the exact parameter list in your permit.

Engineered as one system

What arrives on site is engineered as a system, not a collection of vendors. PLC automation with remote monitoring comes standard, so an operator can watch chemical dosing, flows and alarms from a phone rather than a control room. Modular expansion capacity is designed in from the start; if production doubles in five years, the civil works and hydraulic profile already anticipate the second unit. Where the treatability is uncertain, we run a pilot on your effluent first, because a few weeks of pilot data is cheaper than a mis-sized clarifier.

The surcharge math

The economics usually decide the scope. Municipal surcharges are permanent operating costs that scale with production, while on-site treatment is a capital cost that stops the meter. Toronto bills over-strength discharge under Sewers By-law 681, Metro Vancouver permits industrial discharge under GVS&DD Bylaw 299, and most Ontario municipalities offer surcharge agreements for effluent above sewer limits. For many plants the payback question is a single spreadsheet: this year's surcharge invoice against a quoted system.

What we need to quote

To get a budget number, send three things: your flow rate, a lab analysis or a plain description of the process generating the water, and where the effluent goes. A process engineer reviews every proposal before it reaches you, and the quote comes back with a sized configuration, budget price and delivery timeline for your facility, anywhere in Canada, in English or French. Pilot rentals and treatability studies are quoted separately when the stream demands proof before capital, and commissioning support stays available after handover, so the plant you buy keeps meeting the permit it was sized for.