Loading...
Oil & Gas / Produced Water in Laval, Quebec
Industrial Wastewater Canada sizes and supplies oil & gas / produced water for plants in Laval, Quebec. Local demand is driven by pharmaceuticals, food processing, biotech, plastics, discharging under Laval's sewer-use rules toward Rivière des Mille Îles. Quote requests with flow rate and effluent type get a sized proposal.
Oil and water separate on their own, given time. The entire discipline of oil and gas wastewater treatment exists because nobody in the industry has that time, and because the last few percent of oil refuses to leave without help. Free oil rises and skims easily. Dispersed droplets need coalescing plates or gas flotation. Emulsified oil, stabilized by production chemicals and shear from pumps, needs chemistry to break before any mechanical device can touch it. Knowing which fraction dominates your stream decides the equipment, which is why we ask for an oil-in-water analysis before we quote anything.
Applications across the value chain
The applications span the value chain. Upstream, produced water from Alberta and Saskatchewan wells carries oil, solids and dissolved salts, and is treated for reinjection, disposal, or reuse in waterfloods, where oil carryover fouls injection formations. Midstream terminals and truck washouts generate slop oil and tank bottoms. Downstream, refineries run API separators as the first line, followed by dissolved gas or air flotation ahead of biological treatment. Gas plants add their own stream: amine and glycol wastes that behave nothing like produced water and should never be mixed with it.
Separators built to API 421
Our equipment for this sector includes API oil water separator packages built to the API 421 gravity-separation design method, corrugated and inclined plate coalescing separators for tighter footprints, induced and dissolved gas flotation units, skimmer systems, and coalescing filter vessels for final polishing where discharge or reinjection specs demand single-digit oil concentrations. For remote batteries and early-production facilities the package arrives skid-mounted and winterized.
Limits differ by regulator
Alberta Energy Regulator directives, Saskatchewan disposal rules and federal offshore regulations each define oil-in-water limits differently, so we design against your specific approval rather than a generic number.
Where your water goes next
Send us the analysis, the flow range and the destination of the water, whether that is disposal well, waterflood or surface discharge. The proposal that comes back will name the separation stages, the expected outlet quality at each, and the turndown behaviour, because oilfield flows never stay at design point for long. A practical note on solids: produced sand and fines shorten the life of every separation stage, so where the well history shows sand production we put hydrocyclones or filtration ahead of the separator rather than letting the API vessel become a settling basin.
Laval's Cité de la Biotech is the reason its wastewater market punches above the weight of a 438,000-resident city. Vaccine manufacturers, pharmaceutical plants and contract research organizations cluster there alongside food processors and plastics plants, all discharging under CMM By-law 2008-47 with the Rivière des Mille Îles as the local receiving water. Biotech effluent plays by batch rules Pharma and biotech streams rarely fail sewer limits on volume; they fail on what a single batch contains. Cité de la Biotech pharma cluster; CMM By-law 2008-47 discharge limits. That is the regulatory backdrop for oil & Gas / Produced Water in Laval: equipment gets sized against the local limits on the route to Rivière des Mille Îles, not against a national average.
Location
Laval, Quebec
Population 438K
Receiving Water
Rivière des Mille Îles
Pricing
Sized & quoted per project
What's Included in Laval
Sizing against Laval's sewer-use and surcharge regime (cité de la Biotech pharma cluster; CMM By-law 2008-47 discharge limits)
Support for direct-discharge projects requiring a ministerial authorization under section 22 of Quebec's Environment Quality Act
Effluent characterization matched to Laval's dominant dischargers: pharmaceuticals, food processing, biotech, plastics
Discharge route review for systems releasing toward Rivière des Mille Îles
Oil & Gas / Produced Water on the ground in Laval
In Laval's Cité de la Biotech, industrial wastewater compliance is batch-wise: kill tanks, hold-test-release and pH swings from 2 to 12, documented once for the CMM and once for the GMP auditor. In Laval, the plants asking about oil & Gas / Produced Water are mostly in pharmaceuticals, food processing, biotech and plastics, and each of those sectors puts a different load on a treatment train. Cité de la Biotech pharma cluster; CMM By-law 2008-47 discharge limits. Direct discharge toward Rivière des Mille Îles instead requires a ministerial authorization under section 22 of Quebec's Environment Quality Act. In a city of Laval's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Laval tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
FAQ
Frequently Asked Questions
Everything you need to know about our services.
Do you supply oil & Gas / Produced Water in Laval?
Yes. Industrial Wastewater Canada sizes and supplies oil & Gas / Produced Water for plants across Laval and the surrounding region. Most local demand comes from pharmaceuticals, food processing, biotech, plastics. Send a quote request with your flow rate and effluent type and a sized proposal follows.
What discharge rules apply to industrial wastewater in Laval?
Cité de la Biotech pharma cluster; CMM By-law 2008-47 discharge limits. Cleaning-in-place cycles swing pH from 2 to 12 within an hour, spent media carries high COD, and certain actives must be deactivated before any drain. The engineering answer is batch-wise: kill tanks, hold-test-release protocols and equalization that flattens the swings before the by-law's sampling point. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Rivière des Mille Îles needs a ministerial authorization under section 22 of Quebec's Environment Quality Act. We size equipment against whichever limit governs your outfall.
How is oil & Gas / Produced Water sized for a plant in Laval?
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Laval's local limits. A processor in a city of 438K with pharmaceuticals as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
What does oil & Gas / Produced Water cost in Laval?
There is no list price; every system is sized and quoted per project. The economics are local, though. Documentation matters double here, once for the CMM inspector and once for GMP auditors who treat the drain as part of the quality system. Food plants on the island still need classic BOD pretreatment, and both worlds fit inside one service territory. Payback in Laval is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Send the flow rate. Get the system.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.
In this city
Equipment available here.
Industrial Wastewater Treatment Systems→Oil Water Separators→Dissolved Air Flotation (DAF) Systems→Membrane Bioreactor (MBR) Systems→MBBR Systems (Moving Bed Biofilm Reactors)→Lamella Clarifiers→Sludge Dewatering Screw Presses→Dewatering Centrifuges→Industrial Reverse Osmosis Systems→Wastewater Evaporators & ZLD Systems→Belt Filter Presses→Coalescing Filters→Industrial Bag & Cartridge Filtration→Food & Beverage Processing→Dairy Processing→Breweries & Distilleries→Meat & Poultry Processing→Pulp & Paper→Pharmaceutical & Biotech→Textile & Dyeing→Mining & Mineral Processing→Oil & Gas / Produced Water→Metal Finishing & Plating→Chemical Manufacturing→Power, Boilers & Cooling Towers→
Nearby cities