Loading...
Loading...
Industrial Wastewater Canada sizes and supplies oil water separators for plants in Kelowna, British Columbia. Local demand is driven by wineries & cideries, fruit processing, aerospace MRO, breweries, discharging under Kelowna's sewer-use rules toward Okanagan Lake. Quote requests with flow rate and effluent type get a sized proposal.

Every vehicle wash bay, machine shop, fuel depot and refinery in Canada faces the same line item in its sewer-use bylaw: oil and grease, typically capped somewhere between 15 and 100 mg/L depending on the municipality. An oil water separator is the standard way to meet that cap. It exploits the density difference between oil and water: flow slows inside the vessel, droplets rise and coalesce into a surface layer that gets skimmed, and cleaned water leaves from below.
The choice that matters is between the two main designs. A gravity API separator is a long rectangular basin sized to Stokes' law, built to let droplets of roughly 150 microns and larger rise out. It is robust, tolerant of solids and easy to maintain, which is why refineries still standardize on it. A coalescing-plate separator adds inclined plate packs or oleophilic media that intercept far smaller droplets, down to about 20 to 60 microns, so it reaches better effluent quality in a fraction of the footprint. Our coalescing configurations hold effluent under 10 ppm oil and grease in free-oil service, and many sites pair an API basin with a coalescing polishing stage.
We quote both, in above-grade and below-grade tanks, with API 421 compliant configurations where the specification calls for it. Options include oil-stop valves that close automatically when the oil layer reaches capacity, high-level alarms, and sludge baffles for streams that carry grit. What a separator will not do is remove chemically emulsified or dissolved oil; if your stream carries surfactants from a wash process, we will tell you plainly that you need chemical treatment or flotation ahead of the separator, because selling you a tank that cannot meet your limit helps neither of us.
Sizing depends on flow rate, droplet size distribution and oil type, which is why the search term oil water separator, at 480 searches a month in Canada, so often ends in a mis-sized purchase from a catalogue. Send us your flow, a recent lab analysis or a description of the process, and your discharge destination. We return a sized configuration, budget price and delivery timeline, reviewed by a process engineer before it reaches you, for any site in Canada. Installation support and commissioning are quoted per project, and replacement plate packs and media remain available for the life of the vessel. Below-grade installations ship with traffic-rated covers where the separator sits in a drive lane, and we keep skimmer parts and alarm components on the shelf so a maintenance call does not become a compliance gap.
Kelowna's industry follows its orchards and vineyards. Wineries, cideries, fruit packers and a fast-growing brewery scene share the city of 145,000 with aerospace maintenance operations, and their wastewater runs seasonal in a way few markets do: crush season turns winery drains into rivers of sugar for eight weeks, then the flow all but stops. Okanagan Lake, the receiving water and the region's tourism economy in liquid form, sits under phosphorus limits that keep municipal scrutiny high. Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. That is the regulatory backdrop for oil Water Separators in Kelowna: equipment gets sized against the local limits on the route to Okanagan Lake, not against a national average.
Location
Kelowna, British Columbia
Population 145K
Receiving Water
Okanagan Lake
Pricing
Sized & quoted per project
Kelowna's crush season sends 15,000 mg/L COD winery effluent toward a phosphorus-limited Okanagan Lake for eight weeks a year, a seasonality problem that defines wastewater design here. In Kelowna, the plants asking about oil Water Separators are mostly in wineries & cideries, fruit processing, aerospace MRO and breweries, and each of those sectors puts a different load on a treatment train. Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. Direct discharge toward Okanagan Lake instead requires a waste discharge authorization under British Columbia's Environmental Management Act. Kelowna's municipal plant has limited spare capacity, so a single overloaded industrial connection shows up quickly in its intake numbers. Projects in Kelowna tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies oil Water Separators for plants across Kelowna and the surrounding region. Most local demand comes from wineries & cideries, fruit processing, aerospace MRO, breweries. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. Eight weeks of crush, ten months of quiet Winery effluent at crush can hit 15,000 mg/L COD, acidic and nutrient-poor, brutal feed for any biological system asked to wake up cold. The designs that survive Okanagan seasonality buffer aggressively: large equalization, pH correction, and either robust physical-chemical treatment or biology kept alive year-round on a maintenance load. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Okanagan Lake needs a waste discharge authorization under British Columbia's Environmental Management Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Kelowna's local limits. A processor in a city of 145K with wineries & cideries as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Fruit packers add washwater with pesticide-residue considerations; breweries add yeast and caustic CIP water on a steadier calendar. Around it all, water scarcity gives reuse projects, vineyard irrigation with treated process water, a stronger business case here than almost anywhere in Canada. Payback in Kelowna is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.