Loading...
Loading...
Industrial Wastewater Canada sizes and supplies oil & gas / produced water for plants in Kelowna, British Columbia. Local demand is driven by wineries & cideries, fruit processing, aerospace MRO, breweries, discharging under Kelowna's sewer-use rules toward Okanagan Lake. Quote requests with flow rate and effluent type get a sized proposal.

Oil and water separate on their own, given time. The entire discipline of oil and gas wastewater treatment exists because nobody in the industry has that time, and because the last few percent of oil refuses to leave without help. Free oil rises and skims easily. Dispersed droplets need coalescing plates or gas flotation. Emulsified oil, stabilized by production chemicals and shear from pumps, needs chemistry to break before any mechanical device can touch it. Knowing which fraction dominates your stream decides the equipment, which is why we ask for an oil-in-water analysis before we quote anything.
The applications span the value chain. Upstream, produced water from Alberta and Saskatchewan wells carries oil, solids and dissolved salts, and is treated for reinjection, disposal, or reuse in waterfloods, where oil carryover fouls injection formations. Midstream terminals and truck washouts generate slop oil and tank bottoms. Downstream, refineries run API separators as the first line, followed by dissolved gas or air flotation ahead of biological treatment. Gas plants add their own stream: amine and glycol wastes that behave nothing like produced water and should never be mixed with it.
Our equipment for this sector includes API oil water separator packages built to the API 421 gravity-separation design method, corrugated and inclined plate coalescing separators for tighter footprints, induced and dissolved gas flotation units, skimmer systems, and coalescing filter vessels for final polishing where discharge or reinjection specs demand single-digit oil concentrations. For remote batteries and early-production facilities the package arrives skid-mounted and winterized.
Alberta Energy Regulator directives, Saskatchewan disposal rules and federal offshore regulations each define oil-in-water limits differently, so we design against your specific approval rather than a generic number.
Send us the analysis, the flow range and the destination of the water, whether that is disposal well, waterflood or surface discharge. The proposal that comes back will name the separation stages, the expected outlet quality at each, and the turndown behaviour, because oilfield flows never stay at design point for long. A practical note on solids: produced sand and fines shorten the life of every separation stage, so where the well history shows sand production we put hydrocyclones or filtration ahead of the separator rather than letting the API vessel become a settling basin.
Kelowna's industry follows its orchards and vineyards. Wineries, cideries, fruit packers and a fast-growing brewery scene share the city of 145,000 with aerospace maintenance operations, and their wastewater runs seasonal in a way few markets do: crush season turns winery drains into rivers of sugar for eight weeks, then the flow all but stops. Okanagan Lake, the receiving water and the region's tourism economy in liquid form, sits under phosphorus limits that keep municipal scrutiny high. Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. That is the regulatory backdrop for oil & Gas / Produced Water in Kelowna: equipment gets sized against the local limits on the route to Okanagan Lake, not against a national average.
Location
Kelowna, British Columbia
Population 145K
Receiving Water
Okanagan Lake
Pricing
Sized & quoted per project
Kelowna's crush season sends 15,000 mg/L COD winery effluent toward a phosphorus-limited Okanagan Lake for eight weeks a year, a seasonality problem that defines wastewater design here. In Kelowna, the plants asking about oil & Gas / Produced Water are mostly in wineries & cideries, fruit processing, aerospace MRO and breweries, and each of those sectors puts a different load on a treatment train. Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. Direct discharge toward Okanagan Lake instead requires a waste discharge authorization under British Columbia's Environmental Management Act. Kelowna's municipal plant has limited spare capacity, so a single overloaded industrial connection shows up quickly in its intake numbers. Projects in Kelowna tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies oil & Gas / Produced Water for plants across Kelowna and the surrounding region. Most local demand comes from wineries & cideries, fruit processing, aerospace MRO, breweries. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Winery and fruit-processing effluent (seasonal high-BOD); phosphorus limits protect Okanagan Lake. Eight weeks of crush, ten months of quiet Winery effluent at crush can hit 15,000 mg/L COD, acidic and nutrient-poor, brutal feed for any biological system asked to wake up cold. The designs that survive Okanagan seasonality buffer aggressively: large equalization, pH correction, and either robust physical-chemical treatment or biology kept alive year-round on a maintenance load. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Okanagan Lake needs a waste discharge authorization under British Columbia's Environmental Management Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Kelowna's local limits. A processor in a city of 145K with wineries & cideries as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Fruit packers add washwater with pesticide-residue considerations; breweries add yeast and caustic CIP water on a steadier calendar. Around it all, water scarcity gives reuse projects, vineyard irrigation with treated process water, a stronger business case here than almost anywhere in Canada. Payback in Kelowna is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.