Loading...
Loading...
Industrial Wastewater Canada sizes and supplies oil & gas / produced water for plants in Richmond, British Columbia. Local demand is driven by seafood processing, food & beverage, aviation services, cold storage, discharging under Richmond's sewer-use rules toward Fraser River estuary. Quote requests with flow rate and effluent type get a sized proposal.

Oil and water separate on their own, given time. The entire discipline of oil and gas wastewater treatment exists because nobody in the industry has that time, and because the last few percent of oil refuses to leave without help. Free oil rises and skims easily. Dispersed droplets need coalescing plates or gas flotation. Emulsified oil, stabilized by production chemicals and shear from pumps, needs chemistry to break before any mechanical device can touch it. Knowing which fraction dominates your stream decides the equipment, which is why we ask for an oil-in-water analysis before we quote anything.
The applications span the value chain. Upstream, produced water from Alberta and Saskatchewan wells carries oil, solids and dissolved salts, and is treated for reinjection, disposal, or reuse in waterfloods, where oil carryover fouls injection formations. Midstream terminals and truck washouts generate slop oil and tank bottoms. Downstream, refineries run API separators as the first line, followed by dissolved gas or air flotation ahead of biological treatment. Gas plants add their own stream: amine and glycol wastes that behave nothing like produced water and should never be mixed with it.
Our equipment for this sector includes API oil water separator packages built to the API 421 gravity-separation design method, corrugated and inclined plate coalescing separators for tighter footprints, induced and dissolved gas flotation units, skimmer systems, and coalescing filter vessels for final polishing where discharge or reinjection specs demand single-digit oil concentrations. For remote batteries and early-production facilities the package arrives skid-mounted and winterized.
Alberta Energy Regulator directives, Saskatchewan disposal rules and federal offshore regulations each define oil-in-water limits differently, so we design against your specific approval rather than a generic number.
Send us the analysis, the flow range and the destination of the water, whether that is disposal well, waterflood or surface discharge. The proposal that comes back will name the separation stages, the expected outlet quality at each, and the turndown behaviour, because oilfield flows never stay at design point for long. A practical note on solids: produced sand and fines shorten the life of every separation stage, so where the well history shows sand production we put hydrocyclones or filtration ahead of the separator rather than letting the API vessel become a settling basin.
Richmond sits on the Fraser River estuary, where the river's channels braid past Vancouver International Airport and some of Canada's most productive seafood and food processing plants. The city of 210,000 built its industry on that geography: fish processors and cold-storage operators near the river terminals, food manufacturers and aviation-services firms around YVR, all discharging under Metro Vancouver's Bylaw 299 permit system into sewers serving one of the most ecologically sensitive receiving environments in the region. Processing fish beside an estuary An estuary is the worst possible place to get seafood effluent wrong: juvenile salmon rear in the same brackish channels that receive the region's treated discharge, and regulators treat the area accordingly. YVR-adjacent seafood and food processing on the Fraser estuary — sensitive receiving waters. That is the regulatory backdrop for oil & Gas / Produced Water in Richmond: equipment gets sized against the local limits on the route to Fraser River estuary, not against a national average.
Location
Richmond, British Columbia
Population 210K
Receiving Water
Fraser River estuary
Pricing
Sized & quoted per project
Richmond's fish plants discharge beside a Fraser estuary where juvenile salmon rear, so seafood wastewater treatment here pairs DAF technology with housekeeping discipline that prevents the overnight odour complaint. In Richmond, the plants asking about oil & Gas / Produced Water are mostly in seafood processing, food & beverage, aviation services and cold storage, and each of those sectors puts a different load on a treatment train. YVR-adjacent seafood and food processing on the Fraser estuary — sensitive receiving waters. Direct discharge toward Fraser River estuary instead requires a waste discharge authorization under British Columbia's Environmental Management Act. In a city of Richmond's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Richmond tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies oil & Gas / Produced Water for plants across Richmond and the surrounding region. Most local demand comes from seafood processing, food & beverage, aviation services, cold storage. Send a quote request with your flow rate and effluent type and a sized proposal follows.
YVR-adjacent seafood and food processing on the Fraser estuary — sensitive receiving waters. Fish-plant streams here combine high BOD, oils and salt with rapid spoilage that turns a holding-tank problem into an odour complaint overnight. The systems that work pair fine screening and DAF with disciplined housekeeping, prompt offal handling, refrigerated hold tanks where batching is unavoidable. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Fraser River estuary needs a waste discharge authorization under British Columbia's Environmental Management Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Richmond's local limits. A processor in a city of 210K with seafood processing as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Cold-storage defrost water and aviation de-icing runoff add seasonal streams that need their own routing decisions. Payback in Richmond is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.