Loading...
Loading...
Industrial Wastewater Canada sizes and supplies industrial reverse osmosis systems for plants in Longueuil, Quebec. Local demand is driven by aerospace, metal finishing, food processing, plastics, discharging under Longueuil's sewer-use rules toward St. Lawrence River. Quote requests with flow rate and effluent type get a sized proposal.

Reverse osmosis is the workhorse at the clean end of industrial water. Feed water is driven under pressure against a semi-permeable membrane; purified permeate passes through while dissolved salts, silica and organics stay behind in the concentrate stream. Our industrial systems reject up to 99 percent of dissolved solids, which is the difference between city water and boiler feed, between plant effluent and water clean enough to run back into the process.
Three duties account for most of the Canadian installations we quote. Boiler feed is the classic: every dissolved solid that enters a boiler concentrates there, so an RO ahead of the feed train cuts blowdown, chemical consumption and scale. Process water comes second, wherever a product or a rinse demands consistent low-conductivity water regardless of what the municipal supply is doing season to season. The third is wastewater reuse, polishing treated effluent back into washdown or cooling service, where the RO is the final barrier that makes reuse defensible to a regulator.
Canadian water chemistry shapes the engineering more than buyers expect, and cold feed water is the quiet killer of undersized systems. Membrane flux drops as temperature falls, which means a skid sized on summer water starves in February. We size membranes for cold feed water as standard practice, on your winter temperature rather than a brochure assumption. Pretreatment gets the same respect: integrated antiscalant dosing, and where the analysis calls for it, media filtration or softening ahead of the membranes, because an RO is only as reliable as what protects it. Recovery is set from your actual feed analysis, balancing water efficiency against scaling risk instead of chasing a headline number.
The skids arrive pre-piped and pre-wired, with clean-in-place systems built in and remote monitoring so trending performance, pressures and conductivity does not require standing in front of the panel. Energy-recovery options are available where flows are large enough for the savings to matter. Membrane replacement is a scheduled cost, not a surprise, and we keep replacement elements and cartridge consumables available for the life of the system.
To quote, we need a recent water analysis, your required permeate flow and quality, and the feed temperature range. A process engineer reviews the projection and returns a sized configuration, budget price and delivery timeline for your facility, anywhere in Canada. Where reuse is the goal, we document permeate quality against the standard your regulator or insurer expects, so the reuse case is defensible on paper before the first litre flows.
Longueuil's aerospace industry gives its wastewater a distinctive chemistry. The surface-treatment shops serving the sector's manufacturers run anodizing, plating and conversion-coating lines whose rinses carry chromates, cyanides and complexed metals, exactly the parameters CMM By-law 2008-47 restricts most severely for the 254,000-resident city's discharge toward the St. Lawrence. Aerospace surface-treatment shops (chromates, cyanides) under CMM 2008-47 metal limits. That is the regulatory backdrop for industrial Reverse Osmosis Systems in Longueuil: equipment gets sized against the local limits on the route to St. Lawrence River, not against a national average.
Location
Longueuil, Quebec
Population 254K
Receiving Water
St. Lawrence River
Pricing
Sized & quoted per project
Longueuil's aerospace plating shops treat chromates and cyanides under CMM By-law 2008-47 on one side and Nadcap audit scrutiny on the other, so the wastewater system answers to both the inspector and the prime contractor. In Longueuil, the plants asking about industrial Reverse Osmosis Systems are mostly in aerospace, metal finishing, food processing and plastics, and each of those sectors puts a different load on a treatment train. Aerospace surface-treatment shops (chromates, cyanides) under CMM 2008-47 metal limits. Direct discharge toward St. Lawrence River instead requires a ministerial authorization under section 22 of Quebec's Environment Quality Act. In a city of Longueuil's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Longueuil tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies industrial Reverse Osmosis Systems for plants across Longueuil and the surrounding region. Most local demand comes from aerospace, metal finishing, food processing, plastics. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Aerospace surface-treatment shops (chromates, cyanides) under CMM 2008-47 metal limits. Food processors and plastics plants round out the industrial base with more conventional loads. Chromates and cyanides under metro-Montreal limits Metal-finishing wastewater is unforgiving: chromium must be reduced before it can precipitate, cyanide must be oxidized before anything else happens, and mixing the two streams at the wrong point creates problems worse than either alone. Plants discharging to the municipal sewer answer to that regime; anything released directly toward St. Lawrence River needs a ministerial authorization under section 22 of Quebec's Environment Quality Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Longueuil's local limits. A processor in a city of 254K with aerospace as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Compliance in Longueuil therefore starts with segregation at the process line, then staged treatment, chrome reduction, cyanide destruction, hydroxide precipitation, before any combined discharge. Shops here also face aerospace customer audits (Nadcap and OEM flow-downs) that examine effluent handling as part of process control, so the treatment system serves two masters: the CMM inspector and the prime contractor's quality team. Payback in Longueuil is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.