Loading...
Industrial Reverse Osmosis Systems
Sized to your flow rate and effluent. Request a quote for a sized proposal.
We supply
Industrial Wastewater Treatment Systems
Oil Water Separators
Dissolved Air Flotation (DAF) Systems
Membrane Bioreactor (MBR) Systems
MBBR Systems (Moving Bed Biofilm Reactors)
Lamella Clarifiers
Sludge Dewatering Screw Presses
Dewatering Centrifuges- Industrial Reverse Osmosis Systems
Wastewater Evaporators & ZLD Systems
Belt Filter Presses
Coalescing Filters
Industrial Bag & Cartridge Filtration
By quote
Industrial Reverse Osmosis Systems Overview
Reverse osmosis is the workhorse at the clean end of industrial water. Feed water is driven under pressure against a semi-permeable membrane; purified permeate passes through while dissolved salts, silica and organics stay behind in the concentrate stream. Our industrial systems reject up to 99 percent of dissolved solids, which is the difference between city water and boiler feed, between plant effluent and water clean enough to run back into the process.
The three common duties
Three duties account for most of the Canadian installations we quote. Boiler feed is the classic: every dissolved solid that enters a boiler concentrates there, so an RO ahead of the feed train cuts blowdown, chemical consumption and scale. Process water comes second, wherever a product or a rinse demands consistent low-conductivity water regardless of what the municipal supply is doing season to season. The third is wastewater reuse, polishing treated effluent back into washdown or cooling service, where the RO is the final barrier that makes reuse defensible to a regulator.
Cold feed water changes the math
Canadian water chemistry shapes the engineering more than buyers expect, and cold feed water is the quiet killer of undersized systems. Membrane flux drops as temperature falls, which means a skid sized on summer water starves in February. We size membranes for cold feed water as standard practice, on your winter temperature rather than a brochure assumption. Pretreatment gets the same respect: integrated antiscalant dosing, and where the analysis calls for it, media filtration or softening ahead of the membranes, because an RO is only as reliable as what protects it. Recovery is set from your actual feed analysis, balancing water efficiency against scaling risk instead of chasing a headline number.
Pre-piped skids with CIP built in
The skids arrive pre-piped and pre-wired, with clean-in-place systems built in and remote monitoring so trending performance, pressures and conductivity does not require standing in front of the panel. Energy-recovery options are available where flows are large enough for the savings to matter. Membrane replacement is a scheduled cost, not a surprise, and we keep replacement elements and cartridge consumables available for the life of the system.
What a quote needs
To quote, we need a recent water analysis, your required permeate flow and quality, and the feed temperature range. A process engineer reviews the projection and returns a sized configuration, budget price and delivery timeline for your facility, anywhere in Canada. Where reuse is the goal, we document permeate quality against the standard your regulator or insurer expects, so the reuse case is defensible on paper before the first litre flows.
Industrial Reverse Osmosis Systems: at a glance
| Equipment | Industrial Reverse Osmosis Systems |
|---|---|
| Best for | |
| Typical price range | By quote |
| Service area | Canada |
Key takeaways
- Industrial Reverse Osmosis Systems is a fit when your effluent matches this profile:
- Budget guidance: By quote, depending on flow rate and effluent characterization.
- Included in scope: Near-complete dissolved solids rejection
Industrial Reverse Osmosis Systems Features & Specifications
Near-complete dissolved solids rejection
Integrated antiscalant and pretreatment
Energy-recovery options
Skid-mounted, pre-piped and pre-wired
Cold-feed-water membrane sizing
FAQ
Frequently Asked Questions
Everything you need to know about our services.
What is Industrial Reverse Osmosis Systems used for?
Reverse osmosis is the workhorse at the clean end of industrial water. Feed water is driven under pressure against a semi-permeable membrane; purified permeate passes through while dissolved salts, silica and organics stay behind in the concentrate stream.
What is included with Industrial Reverse Osmosis Systems?
Each configuration covers Near-complete dissolved solids rejection, Integrated antiscalant and pretreatment, Energy-recovery options, Skid-mounted, pre-piped and pre-wired and Cold-feed-water membrane sizing. Scope is confirmed in the written proposal before fabrication starts.
How much does Industrial Reverse Osmosis Systems cost in Canada?
Budget pricing runs By quote. The final number depends on your flow rate, contaminant profile and the discharge limits in your permit or municipal sewer by-law, so we quote against a lab analysis rather than a catalogue page.
What other equipment works alongside Industrial Reverse Osmosis Systems?
Most treatment trains pair industrial reverse osmosis systems with upstream or downstream stages. From our catalogue that most often means Industrial Wastewater Treatment Systems, Oil Water Separators and Dissolved Air Flotation (DAF) Systems. We size the whole train together, so the stages are matched on flow and loading rather than bought piecemeal.
Do you deliver and commission Industrial Reverse Osmosis Systems across Canada?
Yes. Industrial Wastewater Canada is a service-area business covering Canada: equipment is sized and quoted per project, then shipped and commissioned at your site in whichever province you operate.
Send the flow rate. Get the system.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.