Loading...
Loading...
Industrial Wastewater Canada sizes and supplies oil & gas / produced water for plants in Lethbridge, Alberta. Local demand is driven by food processing, agri-food, irrigation agriculture, breweries, discharging under Lethbridge's sewer-use rules toward Oldman River. Quote requests with flow rate and effluent type get a sized proposal.

Oil and water separate on their own, given time. The entire discipline of oil and gas wastewater treatment exists because nobody in the industry has that time, and because the last few percent of oil refuses to leave without help. Free oil rises and skims easily. Dispersed droplets need coalescing plates or gas flotation. Emulsified oil, stabilized by production chemicals and shear from pumps, needs chemistry to break before any mechanical device can touch it. Knowing which fraction dominates your stream decides the equipment, which is why we ask for an oil-in-water analysis before we quote anything.
The applications span the value chain. Upstream, produced water from Alberta and Saskatchewan wells carries oil, solids and dissolved salts, and is treated for reinjection, disposal, or reuse in waterfloods, where oil carryover fouls injection formations. Midstream terminals and truck washouts generate slop oil and tank bottoms. Downstream, refineries run API separators as the first line, followed by dissolved gas or air flotation ahead of biological treatment. Gas plants add their own stream: amine and glycol wastes that behave nothing like produced water and should never be mixed with it.
Our equipment for this sector includes API oil water separator packages built to the API 421 gravity-separation design method, corrugated and inclined plate coalescing separators for tighter footprints, induced and dissolved gas flotation units, skimmer systems, and coalescing filter vessels for final polishing where discharge or reinjection specs demand single-digit oil concentrations. For remote batteries and early-production facilities the package arrives skid-mounted and winterized.
Alberta Energy Regulator directives, Saskatchewan disposal rules and federal offshore regulations each define oil-in-water limits differently, so we design against your specific approval rather than a generic number.
Send us the analysis, the flow range and the destination of the water, whether that is disposal well, waterflood or surface discharge. The proposal that comes back will name the separation stages, the expected outlet quality at each, and the turndown behaviour, because oilfield flows never stay at design point for long. A practical note on solids: produced sand and fines shorten the life of every separation stage, so where the well history shows sand production we put hydrocyclones or filtration ahead of the separator rather than letting the API vessel become a settling basin.
Lethbridge is the food-processing capital of southern Alberta. Potato plants, pork processing, canola crushing and a brewing tradition dating to 1901 cluster in and around this city of 98,000, fed by the largest irrigation district network in Canada and discharging toward the Oldman River. The concentration of high-strength food effluent relative to city size is among the highest in the country. Southern Alberta food-processing capital (potato, pork, canola). That is the regulatory backdrop for oil & Gas / Produced Water in Lethbridge: equipment gets sized against the local limits on the route to Oldman River, not against a national average.
Location
Lethbridge, Alberta
Population 98K
Receiving Water
Oldman River
Pricing
Sized & quoted per project
Lethbridge packs potato, pork and canola effluent above 5,000 mg/L BOD into a small-city sewer system, giving it Canada's clearest per-plant economics for food wastewater pretreatment. In Lethbridge, the plants asking about oil & Gas / Produced Water are mostly in food processing, agri-food, irrigation agriculture and breweries, and each of those sectors puts a different load on a treatment train. Southern Alberta food-processing capital (potato, pork, canola). Direct discharge toward Oldman River instead requires an approval under Alberta's Environmental Protection and Enhancement Act. Lethbridge's municipal plant has limited spare capacity, so a single overloaded industrial connection shows up quickly in its intake numbers. Projects in Lethbridge tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies oil & Gas / Produced Water for plants across Lethbridge and the surrounding region. Most local demand comes from food processing, agri-food, irrigation agriculture, breweries. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Southern Alberta food-processing capital (potato, pork, canola). A small city carrying big organic loads Potato processing alone can generate effluent above 5,000 mg/L BOD loaded with starch and solids; pork processing adds blood and fat; canola crushing contributes oily washwater. Lethbridge's municipal system has grown up handling this mix, and its surcharge framework gives every processor a clear economic case for pretreatment. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Oldman River needs an approval under Alberta's Environmental Protection and Enhancement Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Lethbridge's local limits. A processor in a city of 98K with food processing as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. The technical playbook is mature, screening, DAF, starch recovery where the solids have feed value, with anaerobic treatment increasingly attractive at the largest sites. Water in an irrigation economy is never free, so reuse of treated process water carries real value here, and the prairie winter adds its standard demand: everything must run through −30 °C cold snaps without drama. Payback in Lethbridge is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.