Loading...
Loading...
Industrial Wastewater Canada sizes and supplies oil & gas / produced water for plants in Gatineau, Quebec. Local demand is driven by pulp & paper, food processing, printing, government services, discharging under Gatineau's sewer-use rules toward Ottawa River. Quote requests with flow rate and effluent type get a sized proposal.

Oil and water separate on their own, given time. The entire discipline of oil and gas wastewater treatment exists because nobody in the industry has that time, and because the last few percent of oil refuses to leave without help. Free oil rises and skims easily. Dispersed droplets need coalescing plates or gas flotation. Emulsified oil, stabilized by production chemicals and shear from pumps, needs chemistry to break before any mechanical device can touch it. Knowing which fraction dominates your stream decides the equipment, which is why we ask for an oil-in-water analysis before we quote anything.
The applications span the value chain. Upstream, produced water from Alberta and Saskatchewan wells carries oil, solids and dissolved salts, and is treated for reinjection, disposal, or reuse in waterfloods, where oil carryover fouls injection formations. Midstream terminals and truck washouts generate slop oil and tank bottoms. Downstream, refineries run API separators as the first line, followed by dissolved gas or air flotation ahead of biological treatment. Gas plants add their own stream: amine and glycol wastes that behave nothing like produced water and should never be mixed with it.
Our equipment for this sector includes API oil water separator packages built to the API 421 gravity-separation design method, corrugated and inclined plate coalescing separators for tighter footprints, induced and dissolved gas flotation units, skimmer systems, and coalescing filter vessels for final polishing where discharge or reinjection specs demand single-digit oil concentrations. For remote batteries and early-production facilities the package arrives skid-mounted and winterized.
Alberta Energy Regulator directives, Saskatchewan disposal rules and federal offshore regulations each define oil-in-water limits differently, so we design against your specific approval rather than a generic number.
Send us the analysis, the flow range and the destination of the water, whether that is disposal well, waterflood or surface discharge. The proposal that comes back will name the separation stages, the expected outlet quality at each, and the turndown behaviour, because oilfield flows never stay at design point for long. A practical note on solids: produced sand and fines shorten the life of every separation stage, so where the well history shows sand production we put hydrocyclones or filtration ahead of the separator rather than letting the API vessel become a settling basin.
Gatineau grew up around paper. The mills along the Ottawa River made the city an industrial town long before it became a government one, and the survivors of that corridor, together with food processors and printing operations, still define the industrial wastewater market in this city of 291,000. Discharges run under Quebec's MELCCFP attestation regime, with the Ottawa River, shared with a national capital on the far bank, as the receiving water. Historic paper-mill corridor; MELCCFP industrial attestation regime. That is the regulatory backdrop for oil & Gas / Produced Water in Gatineau: equipment gets sized against the local limits on the route to Ottawa River, not against a national average.
Location
Gatineau, Quebec
Population 291K
Receiving Water
Ottawa River
Pricing
Sized & quoted per project
Gatineau's paper-mill corridor needs its decades-old wastewater treatment modernized to current MELCCFP attestation limits, on a river it shares with the national capital across the water. In Gatineau, the plants asking about oil & Gas / Produced Water are mostly in pulp & paper, food processing, printing and government services, and each of those sectors puts a different load on a treatment train. Historic paper-mill corridor; MELCCFP industrial attestation regime. Direct discharge toward Ottawa River instead requires a ministerial authorization under section 22 of Quebec's Environment Quality Act. In a city of Gatineau's size the industrial dischargers are few enough that the utility knows each one by name, which cuts both ways at permit renewal. Projects in Gatineau tend to be one-of-a-kind rather than repeat configurations, which is exactly the case where sizing from measured effluent data matters most.
Everything you need to know about our services.
Yes. Industrial Wastewater Canada sizes and supplies oil & Gas / Produced Water for plants across Gatineau and the surrounding region. Most local demand comes from pulp & paper, food processing, printing, government services. Send a quote request with your flow rate and effluent type and a sized proposal follows.
Historic paper-mill corridor; MELCCFP industrial attestation regime. Paper legacy, provincial paperwork Pulp and paper effluent is a discipline of its own: high suspended solids from fibre loss, dissolved organics from pulping chemistry, and volumes that dwarf other industries. The mills that remain in the Gatineau corridor have decades of treatment infrastructure that now needs modernization rather than replacement, upgrading clarifiers, tightening fibre recovery, meeting attestation limits written for current expectations rather than 1980s ones. Plants discharging to the municipal sewer answer to that regime; anything released directly toward Ottawa River needs a ministerial authorization under section 22 of Quebec's Environment Quality Act. We size equipment against whichever limit governs your outfall.
From your numbers, not from the city's. We start with measured flow and effluent characterization, then check the result against Gatineau's local limits. A processor in a city of 291K with pulp & paper as the dominant sector rarely has the same loading profile as its neighbours, so treatability data drives the selection.
There is no list price; every system is sized and quoted per project. The economics are local, though. Smaller food and printing plants face the standard MELCCFP process on the standard timelines, and their files must stand up in French. Working both scales, mill retrofit and small-plant attestation, is what this market asks of a supplier. Payback in Gatineau is usually calculated against those surcharge and compliance costs, and the quote spells that comparison out.
Flow, contaminants, discharge limit. An engineer replies with a sized treatment train and a quote — no obligation.